The height is at 12 to 15 cm, and therefore, when doing a ceiling, the reserved space shall not be less than 15 cm, otherwise the cartridge lamp is not installed. It should be empty and smoothly use the mild LED mounted cartridge. It is necessary to make people feel bright and bright, and the LEDs can create a quiet and comfortable atmosphere in the study.

If you want to remove the tube lamp, grab the light mouth of the lamp with your hand, press the cover, and pull it hard. High-quality LED spotlights direct sales LED mounted downlights can consider the environment of light, and according to the space lighting of the LED mounted cartridge, the living room of the Constituent light environment, the LED mounted cartridge is excited and warm.

It is necessary to consider from many aspects, not to be a determined data to be supported, so it cannot be unified. The barrel lamp spacing does not have a standard, and it is necessary to decide according to the amount of installation and the brightness of the light source, and the indoor space is determined.The lighting fixture is embedded inside the ceiling, and the light is concentrated, which has a screw head, which can directly install incandescent or energy-saving lamps.

It has to install the spotlight. The light of the lamp light is very soft, so that the entire space is more warm, so you can set up a few barrel lights in the home improvement, create a warm home atmosphere, and you can use it in any place where you need lighting. Its light is China led flood light a concentrated, which can be equipped with different reflectors, lenses, and bulbs to achieve different light effects.

The barrel lamp relies on the top of the ceiling, you can do it yourself, you can do it yourself, see your strength and tightness. Because the lamp is hidden, no matter how it does not destroy the art effect of the ceiling, it is possible to combine the building decoration

امتیاز بدهید :

Extremely easy to cause safety accidents such as explosions (such as accessing low-voltage light sources into high-voltage lamps) or direct damaging light source and electrical appliances. Environmental protection: harmful substances such as mercury, no contamination of the environment. The principle of the lamp switch mainly uses the tightness of the filament temperature to rise and accelerate.

Value identifier, please pay attention to the light source that is less than or equal to a larger limit value. Frequent switch boots will have a high temperature heat multiple times, and the number of times will naturally reduce the service life of the filament, so don't switch the luminaire too frequently.

If there is a problem, timely replacement of the light source parameters supplied in accordance with the flag, when replacing the light source, be sure to pay attention to the type of light source, interface type, power, color temperature, etc. As an indispensable shopping space in life, the different positioning of the supermarket can meet the different shopping experiences of customers.

Seafood foods How to place the track light fresh and high quality fish Led street lights fixtures manufacturer and marine commodity areas should be used with different cold lighting different from other commodity regions. Second, how the meat is placed with orbit lamps must look clean and hygienic. With a low-color thermal red spectral component, more LED light sources can not only increase the meat color development effect, but also less infrared heat radiation, which is conducive to achieving longer-lasting storage and anti-corrosion.

The toning is more warm and balanced lighting allows meat and poultry food to look more attractive, and the faint pink will make the meat look more fresh. After using the same soft, warm lighting, it can further improve the overall visual effects. LED light sources with more blue spectral components and having higher color temperatures, not only improve the color effect, but also reduces infrared thermal radiation, which is advantageous for achieving longer storage and anti-corrosion protection. 

امتیاز بدهید :

Lamps, anti-glare: wall is bright, the lamp is not bright, the requirements for the spotlights are referred to as follows:meet the cut angle requirements (greater than 30 degrees, more than 45 degrees) The spotlight B, the deep-tibied spotlight C, accompanied by various anti-glare luminaires (including the cleavage) D, special treatment optical reflector 0-30 ° longitudinal adjustable swing angle + level full angle adjustable, increase The function of the spotlight and makes the ceiling light to realize regularity. For example, the following is an ordinary halogen MR16 lamp cup having a beam angle of 10 °, 24 ° and 38 °.

However, if the room is selected with a dark lighting + shallow illuminator, the beam angle will be limited and only medium beams (e. 3. Among them, the choice of the light is very important. "The evaluation criterion of the light light is to choose the part to illuminate your illumination.g. For example, for space similar to the gray elegant tone, the color temperature of the lamps usually requires higher quality to avoid the feeling of "dirty" with "dirty" on the wall or finish.

According to your own decoration preferences, choose LED luminaires, but it is worth mentioning that the lamp is selected, but it is recommended that the LED lamp saves you electricity and safer! . In addition to the main light source, other lighting can also be assisted, for example: projection lamps, LED spotlights, etc. And the light is soft, cheap, energy saving, safe, environmentally friendly, one coer light is leisurely tued around, very beautiful.

The living room is usually a lighting source that is mainly bright to light or LED ceiling lamps because it is the main spotlight illumination source, so this shotlight or LED ceiling lamp must be bright. It is also possible to place a chic LED wall lamp on a suitable wall, which can make waterproof led floodlight factory the wall light., the invisible LED spotlight can be set to oaments. If there is a mural, display cabinet, etc. 

امتیاز بدهید :

Without the main source planning, it can make the surface more concise, cleaner, and it seems higher optical effect. Therefore, it is necessary to equip the dedicated magnetic rail optical transformer during the device. . Then connect the power interface and screw the appropriate device screw.The trajectory lamp device groove not only adheres to the original integrity of the ceiling, but also increases the true texture of the decorative surface.

Magnetic track lights need to convert 220 V AC power to 24 V, 48 V rail using transformers. However, there is no main source source to change the style of the room by controlling the brightness of the lamp, and each part can be planned according to the demand of the lamp, and then the various scenarios can be completed. The magnetic absorbent lamp is the traditional program of the main lamp, the color of the main lamp, the color of the entire room, which is generally constant.

The blanket is stored in advance, and then purchased according to standards. The rear end cap is then removed, and the appropriate fitting is punctured to connect both ends, rear and surrounding facial fittings, if angle, connect the angle coupler. There is a danger of electric shock. It should be noted that the track line is different from the ordinary traces. Because of its veil, it is very popular among people.

The whole space is simple and clear, and you can see the concise preserved texture in every coer, enrich people's experience and space. More uniform light, can be used more layered, or can be used with different lights, such as wall lights, floor lamps, table lamps Create Led High Bay Light Fxiture a bright atmosphere of different lights and small chandeliers. In short: The headless lighting plan focuses on "people", to prevent overloading and outline the aesthetic texture of the day in mode and simple ways.

First, you need to confirm the opening position and standard of the ceiling, select the appropriate lights and accessories, and then open, reserved drive lines and embedded tracks depending on the appropriate standard. The advantage of large-scale plans without the main lighting light is the high degree of freedom and controlled plans

امتیاز بدهید :

What is a constant voltage lamp? That is, when the voltage is constant, the connected lamp strip can be used normally, and does not need to adjust the lamp according to the voltage of the voltage. Low voltage lamp belt manufacturers LED lamp manufacturers pay attention to three, pay attention to current LED power supply is an important factor using low voltage lamps.

The other is 24V, widely used in large-scale projects such as shopping mall decoration, building exterior wall decoration, stage decoration, etc. The ordinary constant voltage lamp strip does not blink in the naked eye, and the inferior lamp bar can see the obvious flicker. Now with the development of the LED industry, many small plants, small businessmen began to produce light strips. .

LED lamp manufacturers Note, familiar with LED lamps manufacturers, specifications of low voltage lamps, common specifications are 12V, general home improvement or other small local decoration options to use 12V light strips, on the one hand, friends are not familiar with the specifications of the light strip, Rely on the recommended shop. Due to the low pressure drop of 24V, the lighting effect of the light strip will be very good.

Some plants will save costs and materials, which will led flood light manufacturers save the production process and materials of the lamp, so the quality of the product is not guaranteed, so we have to compare three products and choose conventional products. LED lamp manufacturers have precautions. Constant voltage lamp strips will not flash under constant pressure.

Many users will buy a power connection, so it is easy to damage the lamp strip, because different types of light strips are equipped with different power supplies, and if the low voltage lamps are connected to high voltage power supplies, it is easy to be damaged, which is worth noting. It is a cost-effective low-pressure neutral lamp. In addition to the above two, there is a constant voltage lamp strip, or it can be used as a low pressure light strip

امتیاز بدهید :